|
MerCruiser Lower Drive PROUDLY MADE In the USA!! Due to the commitment to higher quality, our gears must be used as matched sets (forward, Pin & Rev). In most cases, they are made from a higher grade of steel which may damage other gears. |
||||
| Type | Fits | OE# | Part# |  |
| Lower Seal Kit | R MR Alpha I | 26-33144A 2 | 64144 | |
| Lower Seal Kit | Alpha I Gan II | 26-816575A 3 | 64575 | |
| Complete Lower Gear Set | This is the Gen II gear set with oe fwd gear Bearing to retrofit into Alpha I housing | - | 64086 | |
| Complete Lower Gear Set | Alpha Gen II | - | 64087 | |
| Drain Screw w/ Gasket | - | 22-67892A 1 | 64892 | |
| Clutch Dog | R MR Alpha GII & 3.0L OB | 52-853594T | 64594 | |
| Clutch Dog Spring | R MR Alpha GII & 3.0L OB | 24-30893 | 65893 | |
| Clutch Dog Pin | R MR Alpha GII & 3.0L OB | 17-30632 | 65632 | |
| Lower Driveshaft (Drive Shaft) | MR Alpha I | 45-42634 | 64634 | |
| Lower Driveshaft (Drive Shaft) | Alpha Gen II | 45-816919 | 64919 | |
|
Prop Shaft |
R MR Alpha I Gen II | 44-850308, 44-824110 | 64110 | |
|
Reverse Thrust Ring |
R MR Alpha I Gen II & Outboard | 68100 1 | 64100 | |
| Driveshaft (Drive Shaft) Retainer Nut | R MR Alpha I | 824519 1 | 64519 | |
| Shift Shaft | R MR Alpha I Gen II | 77481 1 | 64481 | |
|
Bearing Carrier |
Alpha I & Gen II | 818763A10 | 65763 | |
|
Shift Spool |
R MR Alpha I Gen II & Outboard | 818349A1 | 64349 | |
|
Shift Crank |
R MR Alpha I Gen II & Outboard | 76865 | 65865 | |