|
Outboardparts.com: your source for Outboard Motor Parts. |
| or: |
| MerCruiser Section |
|
Miscellaneous Sealers, Tools and Hardware |
|||
|
Model Number |
Description |
Fits / DETAILS |
|
| 201 | Flywheel Puller | ( hammering on flywheel to remove will demagnetize the magnets ) | |
| SR107 | Universal Starter Brush Holding Tool | - | |
| HT100 | Temperature Tattle-tale | Sold 5 in a pack 150 - 155 melting temp. Attach with epoxy | |
| 904 | Lifting Eye | OE#91-90455 1 | |
| RB7000 | 1984-91 oe 10-93886; Mercury Outboard Rod Bolt | Merc Rod Bolt, (bottom guided) | |
| RB8000 | 1992-up, oe 10-76349-1; Mercury Outboard Rod Bolt | Merc Rod Bolt, top Guided | |
| RB9000 | L3, L4, 3.0L V6; oe10-94320; Mercury Outboard Rod Bolt | Merc Rod Bolt | |
| 011-212 | Oil Injected Block Off; L3-L4 | Oil Injected Block Off | |
| D7000 | C-Clips; 2Cyl - 6Cyl; Sold individually | C-Clips | |
| D2500 | Wrist Pins; 3.375 and 3.500 Bore | Wrist Pins | |
| 271B | Many uses size | Loctite Thread Locker | |
| 235 | Sealing Compound | OMC Gasket Sealing Compound, oe 509235 | |
| 235-16 | Sealing Compound | "Peanut Butter" OMC Gasket Sealing Compound, oe 509235, 16 oz can | |
| 271B | Loctite Thread Locker | Many uses size | |
| 271 | Loctite Thread Locker | Single use size | |
| 312 | Plug | Water tight plug boot | |
| 1000 | Gasket Maker and Sealer | No longer available. Replacesced by "Three Bond 1104". forms gasket to prevent leaks under high temperature and pressure, resists gas & oil, ideal for carburetors. | |
|
GS1 |
GelSeal | Seals metal surfaces, Temperature range of -65 to +300 degrees F, red colored | |
|
GS1-10 |
Larger Gel Seal | Designed to seal metal surfaces such as blocks and surfaces. Recommended in service mauals. Temperature range of -65 to + 365 Degree F. Red in color. | |
|
18-9016 |
RTV Silicone | Hi-temp RTV Silicone | |
| GS1 | Seals metal surfaces, Temperature range of -65 to +300 degrees F, red colored | GelSeal | |
